OLED And Driver Card
SVGA+ Monochrome OLED with customizable Driver Card
Ophal SVGA+ series OLED module
Ophal SVGA+ series OLED module is a Plug and Play module consisting of:- 0.62” 1.8g Si-Base AMOLED display screen from eMagin & 100% “Make in India” low power electronics driver card (user customizable) with proprietary algorithm.
It is the most power-efficient system solution for virtual imaging devices which supports display 852×600 with aspect ratio of 7:5 (W: H) & requires just one single +5V DC supply & Analog Video_In as input along with user access control pins for display parameters adjustment.
The applications range from security and surveillance to industrial diagnostics & personal entertainment.
Proven in the military, commercial, and consumer systems, giving high-resolution, flicker-free virtual images, working effectively even in extreme temperatures and high-vibration conditions.
SVGA+ Monochrome OLED with customizable Driver Card
Ophal SVGA+ series OLED module
General Operating Characteristics
- Formats: SVGA+: 852 x 600 pixels
- Viewing Area: SVGA+: 12.78 x 9 mm
- Pixel Aspect Ratio & Pitch: 15 µm squares
- Uniformity:>85% (area uniformity as per VESA FPDM Standard)
- Luminance Nominal: 150 cd/m2
Video Input
- Video inputs: PAL (monochrome only)
- Video Signal Bandwidth: 56 MHz maximum (VESA SVGA 85 Hz mode)
- Control & Serial Interface: Digital 3.3V CMOS
- Frame Rate: 30 to 85 Hz
- Mechanical Envelope: 19.78×15.2x5mm
- Display Aspect Ratio: 4:3 or 16:9
- Weight: 1.8g (excluding driver card)
- Contrast Ratio: >100:1
- Operating Temperatures: -40° C to +65° C
- Humidity: 85% RH non-condensin
Power Interface
- OLED driver card Supply: 5.0V, 100 mA.
- Total Power Dissipation: Typically <250 mW@60 cd/m2 running movie-like video. 400 mW peak (25° C, 60 Hz, All pixels on)
Applications
- Night vision/thermal imaging
- Situation awareness
- Command and control
- Field maintenance and repair
- Instrumentation and test equipment
- Mobile computing systems
- Augmented reality
- Personal entertainment systems
What’s included
To use the Ophal SVGA+ series OLED module, you need below accessories, included in the box:
- SMB cable for video input.
- Mating cable for Nicomatic connector for Command and control signal.
- User Manual, Test Certificate, CoC, COO & Local Content Certificate (CLASS-I).
Ordering Information
- Ophal SVGA+ series OLED module GREEN Monochrome Part# OOIPL-SVGA+G
- Ophal SVGA+ series OLED module WHITE Monochrome Part# OOIPL-SVGA+M
